Warehouse & Manufacturing
Typical risks: condensation, mold, corrosion and unstable material quality. Key inputs: room volume, temperature, current/target RH, doors, air exchange and internal moisture. Product path: DY or DYD.
Industrial models →APPLICATION ROUTER
Start from the moisture load.
A reliable recommendation needs the environment, not only a requested model. Each path below identifies the critical inputs and suitable equipment families.
Cold Chain & Cold Rooms
Key inputs: minimum temperature, room volume, door-opening frequency, infiltration, evaporator behavior, drainage and defrost. Product path: DW mobile or DYDW ducted. Published minimum temperature is −5°C.
Low-temperature models →Food & Material Drying
Key inputs: material, batch mass, initial/target moisture, process temperature and required cycle. Product path: DS heating, DSG heating/high-temperature or DG high-temperature.
Compare drying types →Pharmaceutical & Laboratory
Key inputs: heat and moisture load, control boundary, filtration, room pressure and acceptance conditions. Product path: precision temperature/humidity, desiccant or standard industrial equipment after review.
Request engineering review →Battery & Electronics
Low-dew-point processes usually require a desiccant path rather than a standard refrigeration dehumidifier. Target dew point, process airflow and regeneration energy must be defined.
Start low-dew-point review →Archives & Museums
Seasonal conditions may require both moisture removal and humidification. Define material sensitivity, room leakage, occupancy and the acceptable RH band.
Two-way humidity models →Commercial Building & Fresh Air
Outdoor moisture load, fresh-air volume, duct resistance, noise, drainage and indoor RH target determine the system path. Product path: DX fresh-air or DYD ducted.
Fresh-air models →Hazardous & Corrosive Areas
Provide hazardous-area classification, gas group, temperature class, corrosive medium and required certification. No explosion-proof recommendation should be issued without written technical review.
Request special-environment review →